Metal roofs are growing fast in Chicago — driven by 50+ year lifespans, dramatic curb appeal, and excellent snow-shedding performance. We install standing-seam, stamped metal shingles, and metal-over-flat hybrid systems.
At The Chicago Roofers, metal roofing is one of our core specialties. Chicago is unlike any other roofing market in the country — a city built on a mix of 1890s greystones, 1920s bungalows, mid-century brick two-flats, modern infill, and dense commercial corridors, all sitting in a climate that swings from 95°F summer humidity to -20°F winter wind chills. A roofing contractor who treats Chicago the same as a suburban tract neighborhood will miss the details that actually keep water out of these buildings. We don't. Every metal roofing project we take on is scoped, priced, and executed around the specific building era, roof geometry, and microclimate of the property in front of us.
What's Included
- 24-gauge standing-seam panels
- Snap-lock and mechanically-seamed systems
- Kynar 500 painted finishes
- Stamped metal shingles (slate, shake, tile profiles)
- Snow guards for pedestrian zones
Why It Matters in Chicago
Snow loves to slide off metal — great for the roof, dangerous for what's below. We always design snow management on metal roofs over walkways, entries, and driveways.
Chicago's combination of lake-effect moisture, sustained winter freeze cycles, and aggressive summer storm patterns means that roofing problems that would take a decade to develop in a milder climate can show up in three or four years here. That's why our approach to metal roofingis built around durability-first detailing — heavier ice-and-water shield coverage, properly terminated parapet flashings, balanced attic ventilation, and material specifications that exceed code minimums in the spots that matter most.
Materials & Systems We Use
For Chicago metal roofing projects, we work exclusively with established, manufacturer-backed systems: architectural asphalt shingles from GAF, Owens Corning, and CertainTeed; standing-seam and stone-coated metal panels rated for Chicago wind zones; EPDM, TPO, and PVC single-ply membranes for flat assemblies; and SBS-modified bitumen where torch-down or self-adhered low-slope systems make sense. We carry manufacturer certifications that unlock extended warranties most contractors can't offer, and we register every warranty in the property owner's name so it transfers cleanly at sale.
Chicago Code, Permits & Inspections
Any meaningful roofing scope in Chicago triggers a Department of Buildings permit. We pull the permit in our name, post it at the property, coordinate the inspector visit, and close the permit when work is complete — a step that protects you when you sell. For landmark districts, designated historic properties, and HOA-governed buildings, we navigate the extra approval layer so your project doesn't get red-tagged. Our crews work to the most recent Chicago energy and building code revisions, including reflectivity requirements on low-slope roofs and ventilation balance rules on steep-slope assemblies.
Our Process
- 1
Design
Panel width, seam height, color, and snow management.
- 2
Fabricate
Panels are roll-formed to length on-site for clean, seamless runs.
- 3
Install
Slower than shingles but the result lasts a lifetime.
What to Expect on Project Day
Crews arrive between 7 and 8 a.m. with a project lead who walks you through the day's plan, protects landscaping and the building exterior with tarps and plywood, and stages dumpsters and materials with the smallest practical street footprint — a real concern on narrow Chicago lots and tight alley access. Magnetic nail sweeps run multiple times per day, every day, including final cleanup. We leave the property cleaner than we found it.
Across Every Chicago Neighborhood
We provide metal roofing in every Chicago neighborhood — from the dense flat-roof corridors of Logan Square and Pilsen, to the bungalow belts of Portage Park and Chatham, to the lakefront high-rises of Edgewater. Local building stock, microclimate, and even prevailing wind direction all change how we approach the work.
Frequently Asked Questions
Is metal noisy in rain?
Not when installed over a solid deck with underlayment. The 'tin roof' sound is from open-frame barn installations.
Does metal dent in hail?
It can in extreme hail, but 24-gauge steel is far more resistant than aluminum or copper.